Publikationsliste für
Gökcen Bas
als Autorin / Autor bzw. wesentlich beteiligte Person
83 Datensätze (2010 - 2020)
Zeitschriftenartikel
G. Bas, M.N. Durakbasa, J.M. Bauer, G. Poszvek:
"Characterization and Utilization of the Intelligent Decision Making Methodology to Improve Quality and Precision in the Machining Process";
Key Engineering Materials,
Precision Machining VIII
(2016),
Vol. 686;
S. 87
- 92.
G. Bas, L. Stoev, M.N. Durakbasa:
"Assessment of the Production Quality in Machining by Integrating a System of High Precision Measurement";
Procedia Engineering,
100
(2015),
S. 1616
- 1624.
Zusätzliche Informationen
J.M. Bauer, G. Bas, M.N. Durakbasa, P. Kopacek:
"Development Trends in Automation and Metrology";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 48
(2015),
Issue 24;
S. 168
- 172.
Zusätzliche Informationen
J.M. Bauer, M.N. Durakbasa, G. Bas:
"Multi Functional Intelligent Measurement Robot, As a Part of a Global Quality Management System for Collaboration Between Small, Medium and Large Scale Enterprises";
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
ISSN: 1582-2559;
S. 67
- 72.
Zusätzliche Informationen
J.M. Bauer, M.N. Durakbasa, G. Bas, E. Güclü, P. Kopacek:
"Telepresence in Education";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 48
(2015),
Issue 24;
S. 178
- 182.
Zusätzliche Informationen
M. Cakmakci, M.N. Durakbasa, M. Karasu, G. Bas, U. Gurel:
"The importance of quality control within the relationship between the quality engineering and Taguchi methodology";
Key Engineering Materials,
1
(2015),
Vol. 637;
S. 27
- 35.
M. Cakmakci, N. Ortabas-Demirel, M.N. Durakbasa, G. Bas, A. Hornikova:
"Interaction Between Capability Indices and Skewness of Non-Normal Processes Using Quantile Based Estimation and Johnson Transformation";
Quality-Access to Success,
Vol. 13, S5, November 2012
(2012),
S. 79
- 86.
Zusätzliche Informationen
C. Davutoglu, M.N. Durakbasa, G. Bas, E. Güclü:
"Improved Quality and Reliability in Telecommunication Network Testing by means of a Remote Online Test System";
International Journal of Online Engineering (iJOE),
Vol.10, No.4
(2014),
ISSN: 1868-1646;
S. 66
- 69.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas:
"From Nano- to Pico- to Femto-: Future Challenges for Cost-Oriented Manufacturing";
Elsevier ScienceDirect IFAC-PapersOnLine,
1
(2019),
Volume 52, Issue 25;
S. 382
- 386.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas:
"Key Metrology Roadmap in Advanced Manufacturing Technology of Micro-components and Nano-structures";
International Journal of Mechanical Engineering and Automation,
Volume 1
(2014),
6;
S. 347
- 353.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas, J.M. Bauer:
"Implementing Education Vision in the Context of Industry 4.0";
IOP Conference Series: Materials Science and Engineering (eingeladen),
1
(2018),
448 012045;
S. 1
- 6.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas, J.M. Bauer, L. Kräuter:
"Ein intelligentes, vernetztes präzisionsmesstechnisches Konzept als strategischer Ansatz im Forschungs- und Industriebereich";
TM - Technisches Messen,
82
(2015),
Heft 1;
S. 7
- 15.
M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
"Intelligent Design and Advanced Metrology as Strategic Approaches to Efficiency and Quality Improvement in Smart Manufacturing";
International Journal of Advanced Quality,
Vol.41
(2013),
1;
S. 17
- 22.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
"Trends In Precision Manufacturing Based On Intelligent Design And Advanced Metrology";
Key Engineering Materials,
Trans Tech Publications, Switzerland
(2014),
Vol.581;
S. 417
- 422.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas, J.M. Bauer, D. Riepl:
"A Model of Global Cooperation to Enable Intelligent Metrology Applications by Means of an Integrated Teleoperation System";
International Journal of Online Engineering (iJOE),
1
(2015),
Vol 11 No 3;
S. 14
- 19.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas, Z. Özkan:
"A New Strategy for Energy - A Proposal of an Energy Management Implementation Model for Productivity Enhancement within the Integrated Management Systems";
Journal of the Institute of Management Services,
1
(2011),
Volume 55 Number 2;
S. 28
- 30.
M.N. Durakbasa, G. Bas, P.H. Osanna, J.M. Bauer:
"Sustainable Management Systems of Quality, Energy and Environment in Industry / Sisteme durabile de management al calitãtii, energiei si mediului în industrie";
Quality - access to success,
Anul 12
(2011),
4;
S. 21
- 25.
M.N. Durakbasa, J.M. Bauer, G. Bas, L. Kräuter:
"Novel Trends in the Development of Autonomation and Robotics in Metrology for Production in the Future";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 49
(2016),
Issue 29.
Zusätzliche Informationen
M.N. Durakbasa, J.M. Bauer, G. Bas, L. Kräuter:
"Towards a sophisticated approach to cost oriented automation and intelligent metrology in the advanced manufacturing";
Elsevier ScienceDirect IFAC-PapersOnLine,
1
(2018),
51-30;
S. 54
- 59.
Zusätzliche Informationen
M.N. Durakbasa, J.M. Bauer, G. Bas, D. Riepl:
"Telepresence and Teleoperation in Work Concept of Multifunctional Intelligent Factories: Experience of Telepresence in the Micro and Nano Metrology Laboratory AuM-TU-Wien";
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
S. 131
- 136.
Zusätzliche Informationen
M.N. Durakbasa, I. Bogrekci, P. Demircioglu, G. Bas, A. Günay:
"Surface characterization by accurate measurement and image processing systems on machined surfaces of precision cutting tools";
JAMRIS - Journal of Automation, Mobile Robotics & Intelligent Systems,
Volume 6
(2012),
03;
S. 51
- 56.
M.N. Durakbasa, P. Demircioglu, I. Bogrekci, G. Bas, A. Gunay Bulutsuz:
"Assessment of machining with uncoated and coated end mills and determining surface topography using 2D fast Fourier transform";
International Journal of Nanomanufacturing,
Vol.8
(2012),
5/6;
S. 493
- 507.
Zusätzliche Informationen
M.N. Durakbasa, P.H. Osanna, G. Bas:
"Advanced Management Systems for Quality, Energy and Environment for Efficiency Enhancement of Modern Manufacturing Industries";
International Journal Advanced Quality,
Vol.40/2/Belgrade
(2012),
UDC 658.5;
S. 11
- 19.
M.N. Durakbasa, P.H. Osanna, G. Bas:
"Intelligent Design and Advanced Metrology to Support and Improve Integrated Management Systems for Quality, Environment and Energy in Production Engineering";
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
S. 17
- 22.
Zusätzliche Informationen
M.N. Durakbasa, P.H. Osanna, G. Bas, P. Demircioglu, M. Cakmakci, A. Hornikova:
"Novel Developments in Dimensional Nanometrology in the Context of Geometrical Product Specifications and Verification (GPS)";
JAMRIS - Journal of Automation, Mobile Robotics & Intelligent Systems,
Volume 6
(2012),
02;
S. 22
- 25.
M.N. Durakbasa, P.H. Osanna, J.M. Bauer, G. Bas:
"Innovation In Production Metrology For Precision Engineering And To Support Sustainability And Improvement Of Process And Product Quality In Modern Manufacturing Industry";
MSD Journal,
Volume 4
(2012),
1;
S. 5
- 11.
L. Kandrac, I. Mankova, M. Vrabel, J. Beno, J. Stahovec, M.N. Durakbasa, G. Bas:
"Statistical Analysis of Cutting Force, Temperature and Power of FEM Modeling when Machining Titanium Alloy";
Applied Mechanics and Materials Trans Tech Publications,
1
(2014),
Vol. 693;
S. 358
- 363.
Buchbeiträge
G. Bas, W. Pirker, L. Kräuter, E. Güclü, L. Durakbasa:
"Developments in Biomedical Techniques Through Digital Transformation of Industry 4.0 - Applications in Tissue and Dental Implants";
in: "Proceedings of the International Symposium for Production Research 2018",
Springer,
2018,
ISBN: 978-3-319-92267-6,
S. 391
- 401.
Zusätzliche Informationen
A. Bauer, G. Bas, M.N. Durakbasa, L. Kräuter, G. Ugur-Tüncer:
"Measurement Technology & Quality & Justicia in Industry 4.0";
in: "Proceedings of the International Symposium for Production Research 2018",
Springer,
2018,
ISBN: 978-3-319-92267-6,
S. 438
- 450.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas, J.M. Bauer:
"Developments in Advanced Production Engineering Enabled By High Precision Metrology";
in: "Development In Machining Technology",
Vol. 6;
Cracow University of Technology,
2016,
ISBN: 978-80-553-2576-7,
S. 144
- 154.
Zusätzliche Informationen
M.N. Durakbasa, J.M. Bauer, L. Kräuter, G. Bas, G. Poszvek:
"Intelligent Integrated Management and Advanced Metrology for Quality Toward the Factory of the Future";
in: "Proceedings of 3rd International COnference on the Industry 4.0 Model for Advanced Manufacturing",
Springer,
2018,
ISBN: 978-3-319-89563-5,
S. 98
- 108.
Zusätzliche Informationen
M.N. Durakbasa, P. Demircioglu, G. Bas:
"Metrological Evaluations at Micro- and Nanoscaled Surface Characteristics via Process Management Approach";
in: "Development of Surface Metrology, Pawel Pawlus (ed.) et al.",
herausgegeben von: University of Bielsko-Biala;
Development of Surface Metrology, Pawel Pawlus (ed.) et al.,
Bielsko-Biala, Polen,
2012,
ISBN: 978-83-63713-24-9,
S. 45
- 56.
M.N. Durakbasa, P. Demircioglu, J.M. Bauer, I. Bögrekci, G. Bas, O. Bodur, G. Poszvek:
"Additive Miniaturized-Manufactured Gear Parts Validated by Various Measuring Methods";
in: "Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue IMEKO TC 14 2019, Lecture Notes in Mechanical Engineering (LNME)",
Springer International Publishing AG,
2019,
ISBN: 978-3-030-18176-5,
S. 276
- 290.
Zusätzliche Informationen
F. Folkvord, L. Peschke, G. Bas, S. Vitiello, N. Spunda:
"Peer Learning Methodology for Sustainable Energy Usage";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering book series (LNME)",
M.N. Durakbasa, G. Gencyilmaz (Hrg.);
Springer Nature Switzerland AG,
Cham, Switzerland,
2019,
ISBN: 978-3-030-31343-2,
S. 62
- 76.
Zusätzliche Informationen
M. Hasan, J. Svorcan, D. Tanovic, G. Bas, M.N. Durakbasa:
"Conceptual Design and Fluid Structure Interaction Analysis of a Solar Powered High-Altitude Pseudo-Satellite (HAPS) UAV Wing Model";
in: "Digital Conversion on the Way to Industry 4.0 - Selected Papers from ISPR2020, September 24-26, 2020, Lecture Notes in Mechanical Engineering",
ISSN 2195-4364;
Springer Nature Switzerland AG,
Cham, Switzerland,
2020,
ISBN: 978-3-030-62784-3,
13 S.
Zusätzliche Informationen
L. Kandrac, I. Mankova, M. Vrabel, J. Beno, M.N. Durakbasa, G. Bas:
"Outline Of Cutting Edge Preparation And Model Proposal For Nanometrological Process Management";
in: "Scientific Research Reports "Development in Machining Technology"",
W. Zebala, I. Mankova (Hrg.);
herausgegeben von: Cracow University of Technology;
Development in Machining Technology,
Krakow, Polen,
2013,
ISBN: 978-83-7242-655-0,
S. 62
- 81.
Zusätzliche Informationen
L. Kandrac, I. Mankova, M. Vrabel, J. Beno, J. Stahovec, M.N. Durakbasa, G. Bas:
"Application of FEM Analysis to Predict the Effect of Cutting Conditions and Tool Geometry on Temperature and Cutting Forces During Orthogonal Cutting of Ti-6Al-4V";
in: "Scientific Research Reports "Development in Machining Technology"",
herausgegeben von: Cracow University of Technology;
Development in Machining Technology,
2014,
ISBN: 9788372427656,
S. 52
- 74.
Zusätzliche Informationen
ö. Sen, M.N. Durakbasa, G. Bas, G. Sen, O. Akcatepe:
"An Implementation of Cloud Based Simulation in Production";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering book series (LNME)",
1;
M.N. Durakbasa, G. Gencyilmaz (Hrg.);
Springer Nature Switzerland AG,
Cham, Switzerland,
2019,
ISBN: 978-3-030-31343-2,
S. 519
- 524.
Zusätzliche Informationen
ö. Sen, M.N. Durakbasa, M. Baysal, G. Sen, G. Bas:
"Smart Factories: A Review of Situation, and Recommendations to Accelerate the Evolution Process";
in: "Proceedings of the International Symposium for Production Research 2018",
Springer,
2018,
ISBN: 978-3-319-92267-6,
S. 464
- 479.
Zusätzliche Informationen
ö. Sen, M.N. Durakbasa, H. Erdol, T. Berber, G. Bas, U. Sevik:
"Implementation of Digitalization In Food Industry";
in: "DAAAM International Scientific Book 2017",
1;
B. Katalinic (Hrg.);
DAAAM International Vienna,
Wien,
2017, (eingeladen),
ISBN: 978-3-902734-12-9,
S. 91
- 104.
Zusätzliche Informationen
Beiträge in Tagungsbänden
M.N. Durakbasa, G. Bas, J.M. Bauer, L. Kräuter:
"Development Of An Advanced Metrology And Intelligent Quality Management As A Strategic Approach In Manufacturing Industry";
in: "11th IMEKO TC14 Symposium on Laser Metrology for Precision Measurement and Inspection in Industry",
herausgegeben von: Curran Associates, Inc.;
Curran Associates, Inc. e-media,
Red Hook, NY 12571,
2014,
ISBN: 978-1-63266-731-1,
S. 223
- 226.
M.N. Durakbasa, G. Bas, E. Güclü, W. Pirker:
"An Innovative Technique for Succesful Clinical Dental Implementation by Means of Quality Control and Surface Characterization Analyse";
in: "The Publications of the MultiScience - XXVIII. microCAD International Multidisciplinary Scientific Conference",
herausgegeben von: University of Miskolc;
University of Miskolc,
Miskolc HU,
2014,
ISBN: 978-963-358-051-6,
Paper-Nr. H8,
7 S.
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)
G. Bas, P. Demircioglu, M.N. Durakbasa, P.H. Osanna:
"A nanometrological management approach to assess the profile and the surface characteristics of the end milling tools by multi-measurement analysis";
Vortrag: IMEKO XX World Congress International Measurement Confederation,
Busan, Korea;
09.09.2012
- 14.09.2012; in: "Proceedings of XX IMEKO World Congress International Measurement Confederation",
(2012),
ISBN: 978-89-950000-5-2;
6 S.
Zusätzliche Informationen
G. Bas, M.N. Durakbasa, I. Mankova, J. Beno:
"Application of Nanometrology for Assessing the Machining Tool Geometry and Analysis of the Micro/Nano Structure of the End Milling Tool Surfaces";
Vortrag: 9th International Conference on Measurement,
Smolenice, Slowakei;
27.05.2013
- 30.05.2013; in: "Proceedings of the 9th International Conference on Measurement",
J. Manka, M. Tysler, M. Witkowsky, i. Frollo (Hrg.);
VEDA Publishing House of the Slovak Academy of Sciences,
1
(2013),
ISBN: 978-80-969-672-5-4;
S. 223
- 226.
Zusätzliche Informationen
M. Cakmakci, M.N. Durakbasa, M. Karasu, G. Bas:
"The relationship between the quality engineering and Taguchi methodology";
Vortrag: ISMQC - International Symposium on Measurement and Quality Control,
Krakow-Kielce, Polen;
11.09.2013
- 13.09.2013; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control",
Osaka University,
(2013),
4 S.
Zusätzliche Informationen
M. Cakmakci, N. Ortabas-Demirel, M.N. Durakbasa, G. Bas, A. Hornikova:
"Interaction Between Capability Indices and Skewness of Non-Normal Processes Using Quantile Based Estimation and Johnson Transformation";
Vortrag: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
22.11.2012
- 24.11.2012; in: "Quality Access to Success - QIEM 2nd International Conference on Quality and Innovation in Engineering and Management",
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
ISSN: 1582-2559;
8 S.
Zusätzliche Informationen
C. Davutoglu, C. Tepeköylü, E. Güclü, G. Bas:
"INTACT - Intelligent Test Automation System to Achieve Improved Quality";
Vortrag: International Business Information Management Association Conference (IBIMA),
Wien, Österreich;
27.06.2013
- 28.06.2013; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA)",
(2013),
ISBN: 978-0-9860419-0-7;
Paper-Nr. 1481-1486,
6 S.
Zusätzliche Informationen
P. Demircioglu, I. Bogrekci, Y. Cerci, C. Deniz, G. Bas, M.N. Durakbasa:
"Assessment of cylinder liners using computer vision andnumerical thermal analyses";
Vortrag: ISMQC - International Symposium on Measurement and Quality Control,
Krakow-Kielce, Polen;
11.09.2013
- 13.09.2013; in: "Proceedings of he 11th International Symposium on Measurement and Quality Control",
Osaka University,
(2013).
Zusätzliche Informationen
M.N. Durakbasa, G. Bas:
"An Analysis Of The Metrology Techniques To Improve Quality And Accuracy";
Vortrag: XXIX. microCAD International Multidisciplinary Scientific Conference,
Ungarn;
09.04.2015
- 10.04.2015; in: "MultiScience - XXIX. microCAD International Multidisciplinary Scientific Conference",
ITTC Innovation and Technology Transfer Centre,
University of Miskolc
(2015),
ISBN: 978-963-358-061-5;
Paper-Nr. D1-1,
7 S.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas:
"Modeling Efficiency Improvement in Industry Through Implementation of Energy Management Systems";
Vortrag: Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems,
Dubrovnik, Kroatien;
25.09.2011
- 29.09.2011; in: "Proceedings of the 6th Conference",
(2011),
ISBN: 978-953-7738-12-9;
S. 1
- 7.
M.N. Durakbasa, G. Bas:
"Surface Roughness Investigation of the Cutting Edge Of The High Precision Cutting Tools Enabled By Micro and Nanometrological Measurements";
Vortrag: XXVII. microCAD International Scientific Conference,
Miskolc, Ungarn;
21.03.2013
- 22.03.2013; in: "Proceedings of the XXVII. microCAD International Scientific Conference",
(2013),
ISBN: 978-963-358-018-9;
5 S.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas:
"The Integration Of Energy And Environmental Management System To A Model Of Industrial Plant";
Vortrag: XXV, microCAD International Scientific Conference,
Miskolc, Ungarn;
31.03.2011
- 01.04.2011; in: "XXV, microCAD International Scientific Conference",
ITTC Innovation and Technology Transfer Centre,
ME.Tu-162
(2011),
ISBN: 978-963-661-954-1;
S. 27
- 32.
M.N. Durakbasa, G. Bas, J.M. Bauer:
"A Holistic And Integrated Strategy To Improve Energy Efficiency In Industry By Target-Setting Modeling";
Vortrag: ELAEE 2013, Latin American Meeting on Energy Economics,
Montevideo, Uruguay;
08.04.2013
- 09.04.2013; in: "Proceedings of the ELAEE 2013 Conference, 4th Latin American Meeting on Energy Economics",
(2013),
5 S.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas, J.M. Bauer, L. Kräuter:
"Development of an advanced metrology and intelligent quality management as a strategic approach in manufacturing industry";
Hauptvortrag: ISMQC - International Symposium on Measurement and Quality Control,
Krakow-Kielce, Polen;
11.09.2013
- 13.09.2013; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control",
Osaka University,
(2013),
4 S.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
"Intelligent Design and Advanced Metrology as Strategic Approaches to Efficiency and Quality Improvement in Smart Manufacturing";
Hauptvortrag: Total Quality Management-Advanced and Intelligent Approaches (TQM) 2013,
Belgrad, Serbien (eingeladen);
03.06.2013
- 07.06.2013; in: "The 7th International Working Conference "Total Quality Management - Advanced and Intelligent Approaches"",
(2013),
ISBN: 978-86-7083-791-1;
Paper-Nr. 17-22,
6 S.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas, P. Demircioglu:
"A nanometrological process management model to assess the end milling tools in the machining industry";
Vortrag: 13th International Conference on Tools ICT 2012,
Miskolc, Ungarn;
27.03.2012
- 28.03.2012; in: "Proceedings of the 13th International Conference on Tools ICT 2012",
(2012),
ISBN: 978-963-9988-35-4;
S. 271
- 276.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas, L. Kräuter, G. Poszvek:
"The Assessment of Industrial Manufacturing Systems Towards Advanced Operations by Means of Integrated Modeling Approach";
Vortrag: International Business Information Management Association Conference (IBIMA),
Wien, Österreich;
27.06.2013
- 28.06.2013; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA",
(2013),
ISBN: 978-0-9860419-0-7;
Paper-Nr. 1418-1426,
9 S.
Zusätzliche Informationen
M.N. Durakbasa, G. Bas, Z. Özkan:
"A Proposal Of Methodology For The Strategy And Implementation Of Energy Management Within The Integrated Management Systems";
Vortrag: 16th World Productivity Congress and European Productivity Conference,
Antalya, Türkei;
02.11.2010
- 05.11.2010; in: "16th World Productivity Congress and European Productivity Conference",
MPM National Productivity Centre of Türkiye - WCPS World Confederation of Productivity Science,
(2010),
5 S.
M.N. Durakbasa, G. Bas, P.H. Osanna, J.M. Bauer:
"Sustainable Management Systems of Quality, Energy and Environment in Industry";
Vortrag: 1st International Conference Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
17.03.2011
- 19.03.2011; in: "QIEM",
U.T. Press,
1, Cluj - Napoca
(2011),
ISBN: 978-973-662-614-2;
S. 67
- 70.
M.N. Durakbasa, G. Bas, D. Riepl, J.M. Bauer:
"An Innovative Educational Concept of Teleworking in the High Precision Metrology Laboratory to Develop a Model of Implementation in the Advanced Manufacturing Industry";
Vortrag: 2015 12th International Conference on Remote Engineering and Virtual Instrumentation (REV),
Bangkok, Thailand;
25.02.2015
- 28.02.2015; in: "IEEE Conference Publications",
IEEE,
(2015),
ISBN: 978-1-4799-7838-0;
Paper-Nr. DOI: 10.1109/REV.2015.7087288,
7 S.
Zusätzliche Informationen
M.N. Durakbasa, J.M. Bauer, G. Bas:
"A Sophisticated Approach to Advanced Production Engineering - Integrated Management for Sustainable Development";
Hauptvortrag: Proceedings of ICPR-AEM and QIEM 2014 Conference,
Cluj-Napoca, Rumänien (eingeladen);
01.07.2014
- 05.07.2014; in: "2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT",
Technical University of Cluj- Napoca
(2014),
ISBN: 978-973-662-978-5;
5 S.
Zusätzliche Informationen
M.N. Durakbasa, J.M. Bauer, G. Bas:
"Developments in High Precision Metrology for Advanced Manufacturing";
Hauptvortrag: Manufacturing Engineering and Management,
Presov, Slovak Republic (eingeladen);
05.12.2012
- 07.12.2012; in: "Proceedings of 2nd International Conference on MANUFACTURING ENGINEERING & MANAGEMENT 2012",
S. Hloch et al. (Hrg.);
FVT TU in Kosice with a seat in Presov, STEVEPRESS, Ltd.,
Presov, Slovak Republic
(2012),
978‐80‐553‐1216‐3;
S. 210
- 215.
Zusätzliche Informationen
M.N. Durakbasa, J.M. Bauer, G. Bas, G. Poszvek:
"Novel Trends In The Development Of Micro- And Nano- Manufacturing Based On Integrated Management Systems";
Hauptvortrag: The Third International Conference "MECHANICAL ENGINEERING IN XXI CENTURY",
Nis, Serbia (eingeladen);
17.09.2015
- 18.09.2015; in: "Mechanical Engineering in XXI Century",
V. Nikolic, D. Milcic (Hrg.);
Unigraf,
(2015),
S. 327
- 330.
M.N. Durakbasa, J.M. Bauer, L. Kräuter, G. Bas:
"Novel Developments In Advanced Manufacturing And Multi Functional Intelligent Factories (mfif) Towards Production In The Future - Challenges Of Autonomation In Industry 4.0";
Hauptvortrag: 2016 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 4th INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT,
Cluj Napoca, Rumänien (eingeladen);
25.07.2016
- 30.07.2016; in: "PROCEEDINGS Capturing Dynamics of Production Networks: Combining Agility, Innovation and Quality",
D. Popescu et al. (Hrg.);
Technical University Of Cluj-Napoca,
1 / Cluj-Napoca, Romania
(2016),
ISBN: 978-606-737-180-2;
S. 388
- 394.
M.N. Durakbasa, I. Bogrekci, P. Demircioglu, G. Bas, A. Günay:
"Characterization Of The Surface Roughness By Precision Measurements And Image Processing On Machined Metal Surfaces Of Milling Cutters";
Vortrag: Metrology in Production Engineering,
Warschau - Pultusk, PL;
12.09.2011
- 14.09.2011; in: "Metrology in Production Engineering",
(2011),
S. 52
- 57.
M.N. Durakbasa, P. Demircioglu, G. Bas:
"High-Accuracy Measurement And Evaluation Of The Surface Structures Machined In Micro/nano Scale By Tactile And 3d Optical Systems";
Hauptvortrag: 10th International Scientific Conference "Coordinate Measuring Technique CMT",
Bielsko Biala (eingeladen);
23.04.2012
- 25.04.2012; in: "10th International Scientific Conference "Coordinate Measuring Technique CMT"",
Bielsko Biala,
1
(2012),
12 S.
M.N. Durakbasa, P. Demircioglu, G. Bas, W. Pirker:
"Micro-examination of Dental Samples to Enable the Quality Characteristics Required by the Clinical Experience using Biomedical Metrology";
Vortrag: XXVI. microCAD International Scientific Conference,
Miskolc, Hungary;
29.03.2012
- 30.03.2012; in: "The Publications of the XXVI. microCAD",
(2012),
ISBN: 978-963-661-773-8;
7 S.
Zusätzliche Informationen
M.N. Durakbasa, L. Mukhametzianova, G. Bas, E. Güclü:
"The Role of MMS in an Integrated Management for Improving Production Efficiency and Quality. M.N. Durakbasa";
Vortrag: International Business Information Management Association Conference (IBIMA),
Wien;
27.06.2013
- 28.06.2013; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA)",
(2013),
ISBN: 978-0-9860419-0-7;
Paper-Nr. 1385-1393,
9 S.
Zusätzliche Informationen
M.N. Durakbasa, P.H. Osanna, G. Bas:
"Advanced Management Systems for Quality, Energy and Environment for Efficiency Enhancement of Modern Manufacturing Industries";
Hauptvortrag: International Convention On Quality 2012 With The Motto Quality For European And World Integrations,
Belgrade (eingeladen);
05.06.2012
- 07.06.2012; in: "International Convention On Quality 2012",
V. Majstorovic (Hrg.);
UASQ United Association of Serbia for Quality,
1
(2012),
ISBN: 978-86903197-9-4;
Paper-Nr. rad03,
8 S.
M.N. Durakbasa, P.H. Osanna, A. Hornikova, M. Cakmakci, G. Bas, P. Demircioglu:
"Production Engineering On The Basis Of Precision Metrology And Intelligent Tolerancing";
Hauptvortrag: Metrology in Production Engineering,
Warschau - Pultusk, PL (eingeladen);
12.09.2011
- 14.09.2011; in: "Metrology in Production Engineering",
(2011),
S. 46
- 51.
M.N. Durakbasa, W. Pirker, P.H. Osanna, P. Demircioglu, G. Bas, B. Gültekin:
"Application Of Advanced Production Metrology For Quality Improvements In Biomedical Engineering - Analysis And Evaluation Of Surface Structures Of Dental Implants";
Vortrag: 14 Joint International IMEKO TC1+TC7 TC13 th + Symposium,
Jena, Germany;
31.08.2011
- 02.09.2011; in: "Intelligent Quality Measurements - Theory, Education and Training",
(2011),
Paper-Nr. urn:nbn:de:gbv:ilm1-2011imeko-085:3,
5 S.
M.N. Durakbasa, G. Poszvek, G. Bas, J.M. Bauer:
"Developments In Precision Engineering: High Precision Metrology Applications To Improve Efficiency And Quality";
Vortrag: XXI IMEKO World Congress,
Prague;
30.08.2015
- 04.09.2015; in: "XXI IMEKOO World Congress - Full Papers",
1
(2015),
ISBN: 978-80-01-05793-3;
4 S.
Zusätzliche Informationen
M.N. Durakbasa, A. Weckenmann, G. Bas:
"An Integrated and Systematic Method of Metrology for Efficiency, Quality and Functionality Improvement in Precision Manufacturing";
Vortrag: 8th International Conference and Exhibition on Design and Production of Machines and Dies/Molds,
Aydin TR (eingeladen);
18.06.2015
- 21.06.2015; in: "Diemold 2015",
M. Akkök, E. Budak, M. Firat, B. Kaftanoglu (Hrg.);
Mechanical Design and Production Society (MATIM),
(2015),
Paper-Nr. MF 3 (DM 39),
8 S.
Zusätzliche Informationen
M. Erol, M. Yurddaskal, S. Yildirim, O. Mermer, G. Bas, M. Cakmakci, M.N. Durakbasa, E. Celik:
"Nanometric measurement of the pre nano scale tio2 powders via flame spray pyrolysis: synthesis, properties and photocatalytical decomposition of methylen blue";
Vortrag: IMEKO XX World Congress International Measurement Confederation,
Busan, Korea;
09.09.2012
- 14.09.2012; in: "IMEKO XX World Congress International Measurement Confederatio",
(2012),
ISBN: 978-89-950000-5-2;
6 S.
Zusätzliche Informationen
A. Hornikova, G. Bas, B. Sagbas, M.N. Durakbasa:
"Contributing With Design Of Experiment Theory To Quality";
Vortrag: 1st International Conference Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
17.03.2011
- 19.03.2011; in: "QIEM",
S. Popescu, S. Brad, D. Popescu (Hrg.);
U.T. Press,
1, Cluj - Napoca
(2011),
ISBN: 978-973-662-614-2;
S. 95
- 100.
A. Hornikova, M.N. Durakbasa, E. Güclü, G. Bas:
"Data Mining - Novel Statistical Method";
Vortrag: 8th International Conference on Measurement,
Smolenice, Slovakia;
27.04.2011
- 30.04.2011; in: "Measurement 2011",
VEDA,
Bratislava, Slovakia
(2011),
ISBN: 978-80-969-672-4-7;
S. 12
- 15.
K. Yaghmaei, G. Bas, M.N. Durakbasa:
"Computational Modeling Of Mechanical Properties Carbon Nanotubereinforced Hydroxyapatite Nanocomposite By Means Of Mechanical Nanometrology";
Vortrag: IMEKO XXI World Congress,
Prague;
30.08.2015
- 04.09.2015; in: "XXI IMEKO World Congress - Full Papers",
Issue 1
(2015),
ISBN: 978-80-01-05793-3;
5 S.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)
J.M. Bauer, M.N. Durakbasa, G. Bas:
"Multi Functional Intelligent Measurement Robot, As a Part of a Global Quality Management System for Collaboration Between Small, Medium and Large Scale Enterprises";
Vortrag: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca;
22.11.2012
- 24.11.2012.
Zusätzliche Informationen
C. Davutoglu, M.N. Durakbasa, E. Güclü, G. Bas:
"Improved Quality and Reliability in Telecommunication Network Testing by means of a Remote Online Test System";
Vortrag: 11th International Conference on Remote Engineering and Virtual Instrumentation REV2014,
Porto, Portugal;
26.02.2014
- 28.02.2014.
Zusätzliche Informationen
M.N. Durakbasa, J.M. Bauer, G. Bas, D. Riepl:
"Micro And Nanometrology Laboratory Applications In Industry And Education By Telepresence And Teleoperation Remotely In The Global Village";
Vortrag: 11th International Conference on Remote Engineering and Virtual Instrumentation REV2014,
Porto, Portugal;
26.02.2014
- 28.02.2014.
Zusätzliche Informationen
M.N. Durakbasa, J.M. Bauer, G. Bas, D. Riepl:
"Telepresence and Teleoperation in Work Concept of Multifunctional Intelligent Factories: Experience of Telepresence in the Micro and Nano Metrology Laboratory AuM-TU-Wien";
Vortrag: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
22.11.2012
- 24.11.2012.
Zusätzliche Informationen
M.N. Durakbasa, P.H. Osanna, G. Bas:
"Intelligent Design and Advanced Metrology to Support and Improve Integrated Management Systems for Quality, Environment and Energy in Production Engineering";
Hauptvortrag: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO (eingeladen);
22.11.2012
- 24.11.2012.
Dissertationen (eigene und begutachtete)
G. Bas:
"Energy management based model in advanced manufacturing industry enabled by nanotechnology";
Betreuer/in(nen), Begutachter/in(nen): M.N. Durakbasa, P. Kopacek, K. Matyas;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2013;
Rigorosum: 05/2013.